For Quality Housing buildings
R6 R7 R8 R9 R10
In the districts indicated, for Quality Housing buildings, the maximum floor area ratio and maximum residential lot coverage for interior lots or through lots shall be as set forth in the table in this Section. The maximum residential lot coverage for a corner lot shall be 100 percent.
MAXIMUM LOT COVERAGE AND FLOOR AREA RATIO FOR QUALITY HOUSING BUILDINGS
|
District |
Maximum Lot Coverage for an Interior Lot or Through Lot (in percent) |
Maximum Floor Area Ratio |
|
R6 |
60 |
2.20 |
|
R62 |
60 |
2.43 |
|
R61,3 R6A R7B |
65 |
3.00 |
|
R6B |
60 |
2.00 |
|
R7 |
65 |
3.44 |
|
R71 R7A |
65 |
4.00 |
|
R7D |
65 |
4.20 |
|
R7X |
70 |
5.00 |
|
R8 R8A R8X |
70 |
6.02 |
|
R81 |
70 |
7.20 |
|
R8B |
70 |
4.00 |
|
R9 R9A |
70 |
7.52 |
|
R9D R9X |
70 |
9.00 |
|
R10 |
70 |
10.00 |
1 for zoning lots, or portions thereof, located within 100 feet of a wide street in R6, R7 or R8 Districts without a letter suffix outside the Manhattan Core
2 for zoning lots in an R6 District inside the Manhattan Core located within 100 feet of a wide street
3 for zoning lots in an R6 District without a letter suffix the maximum lot coverage for any MIH development utilizing the height and setback provisions of paragraph (c) of Section 23-664 in Mandatory Inclusionary Housing Program Area 1, as of May 24, 2017 in Community District 9 in the Borough of the Bronx and in Mandatory Inclusionary Housing Program Area 2, as of September 7, 2017, in Community District 14 in the Borough of Queens.
