115-211

Special regulations for Inclusionary Housing designated areas

(a)        Applicability

Locations in R7A, R7X, C4-4A, C4-5X, C6-2, C6-3 and C6-4 Districts designated in APPENDIX F of this Resolution within the Special Downtown Jamaica District shall be Inclusionary Housing designated areas, pursuant to Section 12-10 (DEFINITIONS), for the purpose of making the Inclusionary Housing Program regulations of Section 23-90 (INCLUSIONARY HOUSING), inclusive, applicable as modified, within the Special District.

 

(b)        Maximum floor area ratio

The maximum floor area ratio for any zoning lot containing a residential use shall not exceed the base floor area ratio set forth in the table in this Section, except that such base floor area ratio may be increased to the maximum floor area ratio, set forth in Section 23-154 (Inclusionary Housing), through the provision of affordable housing, pursuant to the provisions relating to Inclusionary Housing designated areas in Section 23-90, inclusive.

District

Base Floor Area Ratio

R7A C4-4A

3.45

R7X C4-5X

3.75

R8 C6-2

5.4

R9 C6-3

6.0

R10 C6-4

9.0

(c)        Modification of location requirements

The requirements of paragraph (a) of Section 23-96 (Requirements for Generating Sites or MIH Sites) shall be modified as follows: a generating site may be located in any Inclusionary Housing designated area within the Special Downtown Jamaica District.

(d)        Height and setback

The height and setback regulations of Sections 23-951 (Height and setback for compensated developments in Inclusionary Housing designated areas) and 23-664 (Modified height and setback regulations for certain Inclusionary Housing buildings or affordable independent residences for seniors) shall be modified by the special height and setback regulations of Section 115-23, inclusive.

Top